PSM are manufacturers of an extensive range of Pressure, Hydrostatic, radar and ultrasonic level sensors & transmitters, density and flow Monitoring, measurement and control systems for all industries

OPTIMA 360 SERIES

2 wire hydrostatic level transmitter for Industrial application

The 'Optima' series uses the established measurement principle of pressure sensitive diaphragm and LVDT. Our unparalleled experience in the use of this technology over many thousands of applications results in a transmitter capable of performing accurately and reliably in the most demanding and arduous duties. Diaphragms are provided in a choice of corrosion resistant alloys and are offered in a number of "nominal" ranges, each engineered for optimum performance on it's measurement span. Diaphragm travel is limited by mechanical design, providing unmatched tolerance to high overload and shock conditions. Production employs TIG fusion technology and Mass Spectrometry analysis to ensure complete integrity of all welded joints. A process of thermal 'ageing' is used for stress relief and to ensure long-term stability in service. Submersible construction is standard and the sensor may be free standing , suspended, clamped or pole mounting within the vessel. For external mounting, any standard flange or thread may be specified.

• Submersible construction
• EEXia IIC T5 certified option
• complies with RFI / EMC Standards
• Fully Welded Construction
• superior Low Range Sensitivity / Accuracy
• Unrivalled Overload Tolerance
• applications in oils, chemicals, effluent, viscous fluids, sludges, Water open channel flow, ETC.

Where the application demands, automatic compensation for both process and ambient temperature fluctuations can be built in. For enhanced reliability and stability, all active electronics are remotely sited in a weatherproof enclosure, which, for ease of adjustment, contains all calibration controls. This electronics module meets current IEC standards for RFI/EMC immunity, and is available certified I.S. for use in hazardous zones. Sensor cables are available with a choice of outer sheathing including a high performance PTFE for high temperature (to 150ºC) and aggressive chemical duties.

Home Page | About Us | Products & Solutions | Quality Policy | Data Sheets | Contact Us
Help Page | Site Map | Privacy Policy | Terms & Conditions
© 2007 Bentley Instrument Company Limited

Bentley Instrument Company Limited
Unit 78 Western Parkway Business Park
Ballymount Road, Dublin 12
Republic of Ireland